Post by monctonbgamodder on Oct 15, 2014 7:44:02 GMT -5
When using mold, you will often get LOCA overflow. Cleaning this can be a pain, and if not cleaned properly, you will get more and more LOCA that get cured to the mold as you use it which could put you LCD or Glass out of alignment.
I came up with this great mix which make cleaning the mold really easy.
50%-50% of Acetone and Goof Off.
Let the mold sit in this mixture for about 5 minutes and use an old toothbrush to scrub away any cured/uncured LOCA.
The Mold will come out just like new.
Just remember to wear gloves and both of these can be hard on the skin.
For Acetone, I use Recochem (available at Home Depot) as I know this one is 99.5% pure Acetone. Not sure about other brands though.
