|
Post by skylinenismo on Jun 4, 2014 23:46:23 GMT -5
Hi everyone just curious what the "best" way of separating Iphone 5 model frames from the glass and lcd. I've done one but i didn't like how long it took me or how "invasive" I felt i had to get..... All and all it did work fine in the end, but any tips and tricks would be greatly appreciated! Thanks :)in advance everyone!
|
|
|
Post by monctonbgamodder on Jun 5, 2014 5:59:20 GMT -5
Are you looking at replacing the frame, or just removing the frame to separate the LCD/Glass?
|
|
|
Post by skylinenismo on Jun 5, 2014 11:07:28 GMT -5
This frame is in pretty good condition so i just want to remove it from the LCD/Glass. LCD is good.
|
|
|
Post by Coleman on Jun 5, 2014 14:17:25 GMT -5
Best way I find is to put a piece of packing tape on the glass to keep everything together then heat it up and remove with isesamo or painters knife.
|
|
|
Post by skylinenismo on Jun 5, 2014 14:32:51 GMT -5
Great idea. I'll be trying that one out for sure. Thanks!
|
|
|
Post by monctonbgamodder on Jun 6, 2014 5:44:57 GMT -5
I will have one to do in a few days. I'll make a video of it.
|
|
|
Post by skylinenismo on Jun 29, 2014 2:53:14 GMT -5
I did several frame separations with Coleman's suggestion of using the isesamo or painter's knife's worked great little bit of heat from my heat wand and bingo came right off. Just went all around all the edges several times to be sure it was totally loose before snapping off. Thanks for the tips and tricks guy's. : )
|
|